Key Fob Locks And Unlocks But Wont Start Car. I tried a new battery and it didn't make any difference. You put it in and the car will recognize it after a few minutes.
I have two keys, one i use all the time (1), the other (2) almost never. I tried a new battery and it didn't make any difference. Troubleshooting of remote key won’t unlock car door.
Stick The Key In The Ignition, Turn It To The On Position, Remove It Within 5 Seconds, Then Hold The Unlock Button Down And Press The Lock Button 3 Times Within 10 Seconds And Release Both Buttons.
Do this 3 times for lock and unlock and then your key fob should be reprogrammed with the vehicle. Today went to leave work and the key fob would not unlock that doors !! Btw, that 'stupid' key is why your theft insurance was so cheap.
I Tried A New Battery And It Didn't Make Any Difference.
Locks should cycle once (car will lock and then unlock once). They can sell you a new key without touching the car. The key could also be faulty.
At The Very Least You Should Be Able To Use This To Get Into Your Vehicle, Even If It Won't Work For Starting Your Car (Though It Can Start Certain Cars).
If the backup remote can lock and unlock the door, you will know for sure that there’s something wrong with the main remote. Now using the remote, push lock button, hold for one second, release. My car key unlocks and locks the doors of my g37, but can not start the car from the push button, nor when it is held touching the push button(or in receptacle).
Turn Off And Remove Key.
My key fob can start the car, but it won't lock or unlock the doors. Or is there a different part of the key that works with the start button ignition? So i had to manually use the key to get in the car, of course horn started beeping, then put key in ignition and it stopped,.
Get In Mini Put Key In Ignition Then Take It Out Point Key At Aerial At Back Of Car Press And Hold Unlock Button Press Key Lock Button 3 Times Within 10 Seconds While Keeping Unlock Button Depressed.
With the door open insert your key into the ignition, turn to on position (don't start), wait 5 seconds. To reprogram your hand held unit turn the ignition switch from off to on 5 times within 10 seconds ending in on. It should be about $200 but some dealers are cheaper.